Stairs and temporary access

Layher internal access decks provide working decks, bracing elements and access all in one. Access decks are available in steel or aluminium or as aluminium/plywood combination. Ladders can be integrated (aluminium) or hook-in (steel).

Layher aluminium platform stairs can be used to construct a landing type stair tower adjoining an Allround or SpeedyScaf scaffold, using standard Layher components. Height up to 40 m depending on structural analysis. Permissable load 2.5 kN/m².

A 4 standard stair tower can be easily erected using standard Layher components and aluminium platform stairs, providing separate access either adjoining a scaffold or as a free standing structure anchored to a building. Stairs can run in the same or opposite directions. Permissable load 2.5 kN/m².

Modular stairs of any dimension can be constructed using the required number of single stair components. Permissable load 3.0 kN/m². Weight of each stair module is less than 11kg.

Suitable for compact spaces such as stairwells during construction. Constructed using standard Layher Allround components (standards, ledgers and decks) with a few additional components (stairway stringers, deck locking clamps and handrails). Height up to 10 m. Permissable load 2.0 kN/m².

Layher's 200 stairway tower is our most popular stretcher access stair. Constructed using standard Layher Allround components (standards, ledgers, diagonals and decks) with a few additional components (stairway stringers, deck locking clamps). 10, 12 or 16 standard stairway towers can be constructed, depending on requirements. Permissable load 12 standard stair tower 2.0 kN/m² with a stair flight of 1.09m.

Suitable for stair access in public areas and as escape stair towers. Constructed using standard Layher Allround components (standards, ledgers, diagonals and decks) with a few additional components (stairway stringers, deck locking clamps and handrails). Normal handrails or childproof handrails can be used. Height is adjustable and stair width can be varied by using different width decks for treads (1.09m, 1.57m, 2.07m). 10, 12 or 16 standard stairway towers can be constructed, depending on requirements. Permissable load 16 standard 5.0 kN/m² with a stair width of up to 2.07m.

Fulfils all regulatory requirements for public sites and is the only stair tower to comply with the Building Code of Australia.  Even without harnesses this stair can be built without the risk of falling more than 2 metres. Constructed using standard Layher Allround components (standards, ledgers, diagonals and decks) with a few additional components (stairway stringers, deck locking clamps and handrails). Normal handrails or childproof handrails can be used. Stringers designed for steps 150cm in height. Stair width can be varied by using different width decks for treads (1.09m, 1.57m, 2.07m). 10, 12 or 16 standard stairway towers can be constructed, depending on requirements. Permissible load 16 standard 7.5 kN/m² with a stair width of up to 2.07m.